What are the types of hot pot tables

 There are many kinds of hot pot table materials, and the appearance is also diverse, and each has its own advantages. For modern hot pot restaurants, the choice is wider, and it is more suitable for setting the atmosphere in the store.

Common hot pot tables include wooden tables, marble tables, and stainless steel metal tables, which represent three popular elements of simplicity, simplicity, and fashion. Combined with the style of the store, they are unique and tasteful.

The main material of the wooden hot pot table is made of oak. The table top is an environmentally friendly high-density board with double-layer veneer. It has good moisture resistance. All wooden table colors can be customized, which is humanized to meet your diverse needs.

The marble hot pot table has a wide range of table top materials, including cyanite, weaving jade, and full version of jade. The surface of the turquoise stone is made of resin, which has good abrasion resistance. When coupled with a wire-controlled induction cooker, the product looks simpler and more fashionable.

The stainless steel hot pot table products are made of high-quality stainless steel, the table top is a whole piece of special glass, and the panels are engraved with exquisite patterns, which will never deform. Under the light of the lights, the products and space complement each other, showing the fashion style, which is a must for fashion-themed restaurant chains product.

Now that the induction cooker hot pot table has a high share in the hot pot industry, how to install the induction cooker hot pot table becomes a problem. If the wire of the induction cooker is incorrectly installed during the decoration, it will bury a small hidden danger for the owner of the hot pot table.

Hot pot restaurants must consider the electrical load when using an induction cooker as a cooker. Based on the total power of the induction cooker (the product of a single large power and quantity), plus other electrical equipment such as kitchen equipment, lighting, air conditioning, etc., calculate the total load. Then it is divided into three-phase power output. According to the load of each phase, calculate how thick the cross-sectional area of the wire is, and the total load must also calculate a margin of at least 1.2 times to ensure that the situation does not occur under overload. (Consider the damage of the voltage to the circuit)

Secondly, the three-phase distribution must be balanced, otherwise the voltage of a certain phase will be too high or too low, which will cause the protection of the induction cooker (the operating voltage range of the induction cooker is 80V ~ 280V, and the full power voltage range is: 180V ~ 250V, general technology is not good or manufacturers with poor materials can only work between 160-250V, or even between 190-240V, beyond this range will burn the machine), three-phase After the circuit distribution is balanced, the distribution must be balanced in use, otherwise there is still a problem of phase deviation, so the waiter should consider the distribution position of each phase of the induction cooker when guiding the guests into the seat, and should be distributed to three phases instead of one. 

The installation of the induction cooker should be in the same phase as the inverter air conditioner, because the grid interference generated by the inverter air conditioner will affect the induction cooker, and the result is that either the induction cooker does not work or the air conditioner does not work, depending on who has the strong immunity ability.

Method for calculating the cross-sectional area of the installation wire of the induction cooker: The cross-sectional area of the pure copper power line is 0.75 ~ 1.0 square for each ampere of current (1 square wire is recommended to prevent voltage fluctuation from damaging the circuit), and so on. The above installation design should be calculated on site by a qualified electrician technician.

The standard installation of the induction cooker must ensure that the power load is ensured, but also pay attention to the fact that the power cord plug of the induction cooker cannot be cut for simplicity. Such an approach will cause the voltage resistance to be unstable, insufficient due to the contact resistance of multiple induction cooker power supplies. It is better to install a standard socket under the table, and directly insert the plug of the induction cooker into the socket to get electricity. The socket must be of a standard waterproof type, and it can be ensured that it is in contact with the plug without loosening.