跳至主要内容

Daily Operation And Maintenance Of Paint Room

1. It is forbidden to smoke and use open flames in the barn.
2. The operator must wear a clean overalls as required and wear a gas mask to enter the paint room to operate.
3. The interior and the surrounding environment of the paint room should be kept clean and the person in charge of the painting must be cleaned once a month.
4. Baking room should be maintained according to the use of maintenance, according to the use of frequency, working environment, regular replacement of top cotton, cotton and cotton at the end of cotton.
5. In addition to the use of blowing guns and clay cloth dust, the other before all the spraying process should be completed outside the paint room.
6. In the paint room can only be baking process, and the paint room door can only be opened in and out of the car to ensure that the dust outside the room can not enter the room. Push the trolley that loads the paint components into the paint room and stop at the proper position on the rail.
7. Before the paint, you must check the surrounding environment, to ensure that the paint room in the course of the use of no security risks.
8. Before baking, the flammable items in the paint room must be removed from the room.
9. Make sure that the paint door is closed in place.
10. When the paint operator in the whole operation process, can not leave the barn around, you must always pay attention to baking situation.
11. Baking room at work, turn off the door of the barn, should be away from the barn door away, to avoid hot air burns the face.
12. After use must clean the room walls and platform base, so as not to dust and dust accumulation.
For more auto repairing equipment, just contact with us Shandong Bluesky, we also supply Furniture spray booth, car lift, wheel aligner, wheel balance, tire changer etc. Welcome to contact us.

评论

此博客中的热门博文

Why climbing scaffolding appears in the construction market?

  With the wide application of various climbing scaffolding devices such as square tube frame climbing scaffolding, corrugated frame climbing scaffolding and angle iron frame climbing scaffolding, the development of climbing scaffolding sales can be described as rapid. On the Internet, there are many consultations about which company's climbing scaffolding sales. Now I will briefly explain why climbing scaffolding sales frequently appear in the construction market: 1. Climbing scaffolding have higher plasticity The form of climbing scaffolding sales is also ever-changing. It can sell climbing scaffolding nets separately, or can be designed into different styles according to customer needs, such as V-shaped climbing scaffolding,  lifting climbing scaffolding  and  low-carbon climbing scaffolding . These climbing nets can be refined through various processing techniques such as spraying, anti-corrosion and cutting. The high plasticity of the climbing makes it more suit...

Rolling door motor application

Our Rolling Shutter Door Motor are applied to shopping centers, warehouses, garages, theaters, hotels, banks, factories and other buildings' rolling shutter door's opening and closing, with electric and manual function. Our company is the leader in Electric Roller Door Motor industry. JIELONG has gradually become the most renowned manufacturer for drives of rolling shutter motors and related accessories in China.We have work in this field more than 30 years,we can produce according to your request.We are sure we can make a good manufacture for you and welcome to visit our company. For more Roller Shutter Motor information visit: www.jielong.com.cn

Silicone Rubber Compression Molding Supplier

Our story begins as Xiamen Neway Rubber Products Co.,ltd. In 2005, supplied rubber & silicone products, Silicone Rubber Compression Molding to all over the world. We learned and developed very rapidly during 13 years, and now we are known as Xiamen Neway Rubber & Plastic Products Co.,ltd, because we are not only focus in rubber products, but as a one-stop service enterprise for a wide variety of Plastic products, Rubber Products, Silicone Products, Mould and Rapid Prototypes. Neway’s Production Line: in-house mold design and building, overmolding, plastic injection molding, rubber compression molding, rubber injection molding, extruding, blow molding, foaming molding and die-cutting Neway’s Products Range: Plastic products, Rubber Products, Silicone Products, Mould and Rapid Prototypes for electronic, sealing, mechanical and industrial applications, medical, automotive industry and other various industries. Neway’s main market: 90% of our products are exported to North...